Lekker Sun

Guides › How-to guide

Chapter 12 of 12

Troubleshooting and common questions

Updated 20 October 2026. About 4 minutes to read.

Quick answers for when something in the designer doesn't do what you expect. If your problem isn't here, use the Feedback button in the designer or contact us.

All chapters

I can't add buildings, trees or arrays

Objects can only be added once the project location is set. In the Site card, search for the address, or click or click the map to set the location and then the middle of the site on the map. See setting the project location.

An object won't go where I drag it

Main buildings and panels have to stay inside the dashed project area; neighbouring buildings, trees, chimneys and poles can go up to 25 m outside it (the lighter band). A building marked as a main building can't be outside the square. The area's size depends on your plan (see the pricing page); a bigger plan gives a bigger square. If the house is near the edge, move the project location (✎ in the Site card) so the square is centred on the site. A saved project's location is fixed.

The satellite picture is blurry, old or missing

Satellite pictures aren't equally sharp everywhere. Try the other pictures under the layers button at the top right of the map. When you zoom in further than a picture goes, Lekker Sun enlarges the sharpest level there is rather than showing a blank map.

The heatmap, report printing or wiring diagram is greyed out

These need the project to be saved, and so does the distant horizon. The heatmap and the horizon are also not on every plan (see the pricing page), or comes with a bought project for the site. Until the project is saved, the Results and Wiring tabs show a sample instead of your own design.

My report has a watermark

On plans that include it, the report shows on screen before the project is saved, with a watermark. Save the project and it prints without one.

Simulate year or Calculate doesn't run

  • "Add an array first": there are no panels on the roof yet. See placing an array.
  • Too many objects or panels: a project can have up to 150 objects, and once a design gets close to the limits a Size bar appears under the object list. Remove trees or buildings too far away to shade the panels.
  • Another calculation is running: only one simulation or heatmap runs at a time per account. Wait for it to finish.

A compatibility check is amber or red

Each warning says what to change underneath it. The common fixes are in fixing what the checks flag. Check the temperatures as well: a coldest-air value that's too high hides a cold-morning problem.

The heatmap says it's out of date

You've moved the site or changed a building, tree or chimney since it was made. Click Run again. See when the heatmap goes out of date.

My project has disappeared

  • If your plan saves projects to your account, open your dashboard: saved projects are under Projects.
  • Without an account, projects are kept in the browser you used. A different browser, a private window or clearing the browser's data won't have it. Export projects as files to keep them safe.
  • If someone else signed in on the same browser, the designer starts them with an empty project. Sign back in to your own account.

I can't change a project any more

A saved project can be changed for 60 days from its first save. After that its last saved version still prints, but the design is locked. Its location is fixed from the first save.

The sign-up code hasn't arrived

Check your spam or junk folder. The code works for 15 minutes; after that, ask for a new one in the same window. You can also click the link in the email, as long as you open it in the same browser.