Design. Check. Prove.
Free solar design software that sees every shadow on the roof.
Lekker Sun is solar and battery design software for installers and homeowners. Design the system on satellite imagery, with the roof, the trees and the house next door. Check it against every shadow and the inverter's limits, then simulate the battery and the household's bill half hour by half hour. Then prove it to the client with a report and quote they can check online.
Free to design and check. Runs in your browser, no account needed.
Your installations may be good, but are they lekker?
| Good | Lekker | |
|---|---|---|
| Shading | Shade looks fine at midday. | Every shadow traced to each panel, every half hour, all year round. |
| Placement | Panels go where they fit. | Panels go where a heatmap of every roof shows the most sun, winter and summer. |
| Strings | The string fits on the datasheet. | Highest voltage on a frosty morning, lowest on a sun-baked roof, both within the inverter's range. |
| Yield | A rule-of-thumb figure. | Worked out hour by hour for a whole year. Weather, shade and heat included. |
| Battery | Sized “about right”. | Charged and drained every half hour of a typical year against the household's real use, within the battery's and inverter's limits. |
| Proof | A price on a letterhead. | A report and quote with materials, savings and payback, and a project ID the client can check online. |
Good gets the job done. Lekker gets you the next one.
Make your next job lekkerDesign, check, prove: one tool from roof to quote
Design and check any system for free, as often as you like. When it's a real job, save it as a project to switch on every tool for that site, then hand over the proof.
Design
Find the site on satellite imagery and draw in the buildings (flat, gable, hip, Dutch gable or shed roofs), trees, chimneys and poles. Arrays snap to the roof face they sit on. Scrub through any week and hour and watch the shadows move.
Check
Add the panels, inverters and batteries you actually use. Lekker Sun checks the string voltages at the site's coldest and hottest temperatures and the MPPT and battery limits. It also works out the shade on every panel and the year's production. Free, for as many designs as you like.
Confirm
For a real job, save it as a project: R49 once-off, or included in Pro and Business. Every tool switches on for that site: the battery simulated half hour by half hour, savings and payback against the real tariff, the roof sunlight heatmap, the distant horizon, bypass-diode shading, up to 3 system options side by side and the wiring diagram.
Prove
Hand over a report and a client quote with the bill of materials, compatibility checks, a site plan with shadows, the energy balance and the cash flow. Each carries a project ID the client can check online. Explore the sample project to see it all.
Solar shading analysis, panel by panel
Take a typical day in each month. Every half hour of it, Lekker Sun traces a ray towards the sun from six points on every panel. A building, roof, chimney or pole stops that ray dead. Trees are different: the crown lets some light through, and how much depends on its shape and how thick the leaves are. Light from the rest of the sky is shaded too, by checking how much of the open sky each array can see past everything around it.
What comes back is the share of each panel in shade at each time, a month-by-hour grid showing when the shade turns up, and the energy each array loses to shade over the year. Click a block in the grid and the map jumps to the worst week of that month, at that hour. It's the quickest way we know to find the panel that's going to cause trouble.
After that, production is simulated hour by hour over a typical weather year for the site, with each panel's temperature worked out from the sunlight, the air temperature and how its array is mounted. Hot panels make less power.
Battery simulation, half hour by half hour
A battery that looks right on paper can sit half empty all winter. Lekker Sun follows it through a typical year for the site. Every half hour, solar covers the household's use first, the surplus charges the battery, and the battery carries the evening and night until it reaches its usable limit.
It works from the household's monthly use and a usage pattern, or from smart-meter readings you import. The battery stays within its own charge and discharge limits and the inverter's, its usable depth and its round-trip losses. With zero export, the solar the house can't use or store is shown as lost.
What comes back: how much of the household's electricity the battery supplies each month, what still comes from the grid, self-sufficiency over the year, and a typical summer and winter week with the battery's charge level. Try a bigger or smaller bank as a system option and compare them side by side.
Battery simulation comes with a saved project (R49) or Pro and Business. Battery compatibility checks are free. It doesn't simulate load-shedding schedules; for backup, size the essential loads as well.
Questions about Lekker Sun
Free to design and check
R49 per project
Pro R199 a month, 5 projects included
Still stuck? Contact us.
What is Lekker Sun?
Lekker Sun is web-based design software for solar PV and battery systems. You put the site's roofs, trees and neighbouring buildings on satellite imagery, and from there it works out how much shade lands on each panel through the year, what the system will produce, how a battery gets used and what it all saves. Design it, check it, and when it's a real job, prove it to the client with a report and quote.
Is there free solar design software?
Yes. Lekker Sun is free solar design software that runs in your browser, with no account needed. Design the system, check the shade on every panel and the strings against the inverter, and see the year's production, for as many designs as you like. When it's a real job, save it as a project (R49, or included in Pro and Business). That switches on the battery simulated half hour by half hour, savings and payback against the real tariff, the roof sunlight heatmap, the distant horizon, bypass-diode shading, up to 3 system options side by side and the wiring diagram, and the report and quote.
Who is Lekker Sun for?
Mainly solar installers and system designers who want to check a roof before they quote. Homeowners and business owners use it too, to understand what a proposed system will actually do. It works for sites anywhere in the world. Times follow the site's local time zone, and you can use the built-in usage patterns for homes and small businesses or import your own meter data.
What is solar shading analysis?
Solar shading analysis means working out how much sunlight each panel loses over the year to shadows from the roof itself, from trees and from the buildings next door. A small shadow can drag down a whole string, so this is what decides where the panels go and how you wire them. Lekker Sun does it automatically from whatever you draw on the site plan.
How does Lekker Sun calculate roof shading?
For a typical day in each month, every half hour, it traces a ray towards the sun from six points on every panel. Buildings, roofs, chimneys and poles block the ray completely, and so do panels on a tilt frame or open rack, so rows set too close together shade the row behind them. Trees don't: their crowns let some light through, depending on the tree's shape and how dense the foliage is. Light from the rest of the sky is shaded as well, depending on how much of it each array can see. You end up with the share of each panel in shade at each time, a month-by-hour shading grid for each inverter input, and the yearly energy each array loses to shade.
Does Lekker Sun simulate the battery?
Yes. Every half hour of a typical year, the battery charges from solar the house doesn't use and covers the load until it reaches its usable limit. It stays within its own and the inverter's charge and discharge limits, and allows for round-trip losses. You see how much comes from the battery each month, what still comes from the grid, self-sufficiency, and typical summer and winter weeks with the charge level. It comes with a saved project (R49) or Pro and Business; the battery compatibility checks are free.
Can Lekker Sun show which parts of a roof get the most sun?
Yes. The roof sunlight heatmap works out how much sunlight reaches every part of the roofs over a full year, in kWh/m² on a 0.5 m grid, shaded by the buildings, trees and chimneys around them. Switch between the whole year, winter and summer to see where the panels earn the most. It goes on the report with the sunniest spot marked. The heatmap comes with Pro and Business, or with a bought project, once the project is saved.
Which roof types can I model?
Flat, gable, hip, Dutch gable and shed (skillion) roofs, at any size, pitch, eave height and rotation. Put an array on a pitched roof and it takes the roof's pitch as its tilt. Tick Snap to roof face and it also turns to face the slope it's sitting on. On flat roofs and on the ground, you set the tilt and direction yourself.
Where does the solar irradiation data come from?
Lekker Sun uses an hourly typical weather year for the site from the European Commission's PVGIS. It's built from satellite data and gives direct and diffuse sunlight and air temperature for every hour. If that isn't available, it falls back to long-term monthly irradiation from NASA POWER or PVGIS. You can also type in your own monthly values (from the Global Solar Atlas, say) and the year gets scaled to match.
Does Lekker Sun check inverter and battery compatibility?
Yes. It checks the string's open-circuit voltage at the site's coldest temperature against the inverter's maximum DC voltage, and the MPP voltage against the MPPT window when it's hot and when it's cold. It also looks at the MPPT current and short-circuit current limits, the DC-to-AC ratio, the battery bank voltage against the inverter's battery port, and the charge and discharge currents.
Can Lekker Sun size a battery for backup during power cuts?
Partly. It shows how much of your electricity a battery can supply from stored solar, half hour by half hour, for typical summer and winter weeks and across the year. It doesn't simulate specific outage or load-shedding schedules, though. For backup, add up the essential loads you need to keep running and how long the outages last, and size for that as well.
Can I import smart-meter data?
Yes. Upload a CSV of timestamped readings at 15, 30 or 60-minute intervals, either kWh per interval or average kW. Lekker Sun builds a typical day for each month from it and updates the monthly consumption. Only have hourly figures? You can upload one typical day of hourly usage per month instead.
How do I work out how much electricity my home uses?
Use the free home load calculator in Lekker Sun's Tools. Answer a few questions about the house, check the appliances in each room and when they're used, and it shows the kWh a day and a month, a daily load profile, the backup load for load-shedding and the biggest users. You can check it against a bill and send the result to the designer's Finance page.
Do I need an account?
No. The designer is free without one and keeps your design in your browser, and you can export it as a file whenever you like. Saving a design as a project, which switches on every tool for that site, needs a free account: R49 a project, or included in Pro and Business. Paid plans also keep your projects on the Lekker Sun server and drop the ads.
How do I make a solar proposal for a client?
Design the system in Lekker Sun, put the client's electricity usage and tariff into the Finance step, then save the project and open the report. Everything's in one place: the bill of materials, compatibility checks, a site plan with shadows, the energy balance, payback, NPV and IRR. It prints without a watermark and carries a project ID your client can check online.
How accurate are the results?
They're design estimates, and we'd rather say so upfront. Production is simulated hour by hour over a typical weather year for the site. That covers the shade on each panel, panel temperature (from the sunlight, the air temperature, how each array is mounted and the panel's temperature coefficient) and inverter clipping. On Pro and Business, partial shade across a panel's cell strings and its bypass diodes is modelled too; otherwise shade counts in proportion to the area shaded. Soiling, mismatch, cabling and inverter losses use fixed allowances, and battery replacement isn't modelled. Have a qualified, registered installer confirm the design before you buy or install anything.
Free tools
Quick calculators that run in your browser. No account needed.
Guides for solar designers
Short notes on the checks that make a design hold up, and how to run each one in Lekker Sun.
Using a roof sunlight heatmap to place solar panels
Panels earn the most where the roof gets the most sun, but in winter or over the year? How to read a roof heatmap and choose, with the summer surplus in mind.
How to check string voltage for cold weather
Panel voltage climbs as it gets colder, so the coldest morning is the one that trips inverters. Work out a string's open-circuit voltage, the MPPT window and the current limits, with a worked example.
How partial shading affects solar panels
A shadow over a few cells can cost a third of a panel's output. Here's what bypass diodes do, and how orientation, half-cut cells and optimisers change things.
How to account for trees in a solar shading study
Trees are the hardest thing to model in a solar shading study. They grow, they lose their leaves, and their winter shadows reach further than you'd think.
Choosing solar panel orientation and tilt
Which way to face the panels and how steep to tilt them. Also when an east or west roof is the better bet, and how far apart to space rows on a flat roof.
How to size a home battery from the load profile
Size a home solar battery from the evening and overnight load, not the monthly total. Then allow for depth of discharge and efficiency, and check the inverter's charge and discharge limits.
Check the roof before you quote.
Open the designer and start with the site address.