How to use Lekker Sun
This guide takes one project from an empty map to a proposal the client can accept online. Each chapter covers one stage of the design, with screenshots, and you can read it in order or jump straight to the part you need. The ⓘ icons in the designer open the matching section here.
The example project
Every chapter follows the same house: a family home in Johannesburg with a water heater and the usual evening peak. The owners want zero export (nothing fed back to the grid) and want the system to be set up for winter, when their bills are highest and the days are short.
Zero export changes the design. Solar the house and the battery can't use is simply switched off and lost, so the aim isn't the biggest array the roof can hold. It's an array that makes the most of the short winter days, and a battery big enough to carry the evening.
What you'll need
- The site address, or a rough location you can find on the satellite map.
- Rough roof sizes and heights. The satellite view and the shadows on it get you most of the way.
- The household's monthly consumption, from their bills or a smart-meter export.
- Datasheets for any equipment that isn't in the Lekker Sun library yet.
The designer is free. A few steps need a saved project, and some features are not on every plan: the pricing page shows which plan includes what. See what each plan includes.
Chapters
Getting started
Open the designer, create a free account, find your way around the dashboard and the designer, and see what each plan includes.
Site setup
Find the client's house on the satellite map, set the project location, and save the project so the report prints.
Buildings and shading
Draw the client's roofs, the buildings next door, trees and chimneys, then check the shadows at any time of the year.
Roof heatmap
Run the roof sunlight heatmap before placing panels, and use the winter view to choose where the arrays go on a zero-export project.
System design
Pick panels, an inverter and batteries from the equipment library, place the arrays on the best roof areas and wire them to the inverter inputs.
Compatibility checks
Read the compatibility checks: cold and hot string voltages, MPPT current, inverter size and the battery bank, and fix what they flag.
Consumption and simulation
Enter the client's consumption and tariff, set zero export, simulate the year, read the shading grid and size the battery from the results.
Costing and line items
Turn the design into a priced bill of materials: equipment from the design, plus cabling, mounting, protection and labour lines.
Wiring diagram
Choose the AC side, fuses and generator option, and fill in the ratings and cable sizes on the single-line diagram, with the SANS 10142-1 and SANS 60364-7-712 points it records.
Reports and proposals
Print or download the report, add your branding, and send a proposal the client can accept online.
Your account
Save and reopen projects, track clients, delete projects, give support access, and manage your plan.
Troubleshooting
Quick answers when something doesn't work as expected: greyed-out buttons, missing shadows, failed checks and reports that won't print.
Looking for the background behind a step? The other guides go deeper on cold-weather string voltage, heatmap placement, battery sizing and payback.