How to check a solar quote before you sign
Three quotes, three different systems and three different paybacks. One has more panels, one has a bigger battery, one is cheapest. Before you spend well over a hundred thousand rand, it's worth an hour to compare them properly and check the claims. Here's what to look for.
Explore the sample projectOpens the designer with a worked example of a home system. Free, no account needed.
Get the details on paper
"A 5 kW hybrid with a 10 kWh battery" isn't enough to compare. Ask each installer to list:
- the exact model numbers of the panels, inverter and battery, not just the brand
- how many panels, and the total panel size in kWp
- the battery's nominal size and how much of it is usable (its depth of discharge)
- what's included: mounting, DC and AC protection, cabling, labour, the certificate of compliance, registering the system with your municipality, and monitoring
- the warranty on each item, and who handles a warranty claim
- the payment terms, and what happens if the job runs late
An installer who can't or won't give you model numbers is telling you something.
Compare like for like
The total price tells you little on its own. Put the quotes side by side on the things that drive what you get:
- Expected solar production a year (kWh). Two systems with the same panel size can produce quite differently if one uses a shaded or poorly facing part of the roof.
- Usable battery energy (kWh). A 10 kWh battery at 90 % depth of discharge gives you 9 kWh; one at 80 % gives you 8.
- Inverter power (kW). It caps how much the house can draw from solar and battery at once. A 5 kW inverter won't run a kettle, stove and geyser together without the grid.
- Price per kWh of expected production over the first ten years, not only price per panel.
Check the inverter is allowed on your grid
A hybrid system with a battery is still connected to your home's supply, so the grid rules apply. In Cape Town every new solar or battery system must use a City-approved inverter, have professional sign-off and be authorised before it's switched on. Other municipalities and Eskom have their own registration steps. Ask each installer:
- Is the inverter on my municipality's approved list, and does it hold an NRS 097-2-1 certificate?
- Is registering the system included in the price, and who does the paperwork?
An unregistered system can be an offence under municipal by-laws, and it can cause trouble when you sell the house or claim from insurance.
Check where the panels go
Ask for a layout showing which roof faces the panels go on. In South Africa a north-facing roof is best for yearly output, east and west work well for morning and afternoon use, and south-facing panels lose a lot, especially in winter. Then look up at the roof yourself. Trees, a chimney, a satellite dish or the neighbour's double storey can shade part of the array for months. Winter shadows are much longer than summer ones, because the sun is lower. Our guides on orientation and tilt and trees and shading go into more detail.
Check the strings and the battery
Two technical checks catch a surprising number of quotes:
- String voltage on a cold morning. Panels wired in series add up their voltage, and voltage rises in the cold. Too many panels on one string can push the inverter past its maximum on a frosty morning. See string voltage in cold weather.
- Battery size against your evenings. A battery should be sized from what the house uses between late afternoon and the next morning, not from the monthly total. Too small and it's flat by 21:00; too big and it never fills in winter. See sizing a home battery.
Check the payback claim
Payback depends on assumptions, so ask what each installer assumed:
- Your tariff. Was it worked out from your actual tariff, including fixed monthly charges and inclining blocks, or from a single average price?
- Tariff increases. This year's increases were about 9 %. No one knows future ones, so ask what figure was used and how the payback changes with a lower one.
- Export. If the system won't feed into the grid (zero export), solar that the house and battery can't use is simply lost. A payback that counts every kWh the panels could make will look better than reality.
- Your usage. Was it based on your bills or meter data, or a guess?
Solar payback, NPV and IRR explained shows how these change the result.
Check the paperwork
- A certificate of compliance (CoC) from a registered electrician, for the whole installation.
- The municipal registration or authorisation, where your municipality requires it.
- Warranties in your name, with the serial numbers of the panels, inverter and battery.
- Optionally, a PV GreenCard: a checklist that certified installers fill in to show the installation was done to industry standards.
Checking a quote in Lekker Sun
You can model each quoted system yourself. Find your house on the map, draw the roof and anything that shades it, then place the panels where the installer plans to put them and add the quoted inverter and battery.
For free, Lekker Sun shows the expected yearly and monthly production with shading, and checks the string voltages and the inverter and battery limits. With a saved project it also simulates the battery against your usage through a typical year, works out the bill with and without solar on your tariff, shows what zero export loses, and compares up to three systems side by side, so you can put the quotes next to each other.
If your installer already uses Lekker Sun, their report carries a project ID you can check online.
Try it on your own roof
The designer's free and runs in your browser. You don't need an account.
This guide is general information to help you compare quotes. It is not engineering, electrical, legal or financial advice. Results from Lekker Sun are estimates. Rules differ between municipalities, so check with yours, and have a qualified, registered installer confirm the design.